Search

Search Criteria

     

Products meeting the search criteria

Sort By:  
  • Pi2Go Fully Integrated Robot for Raspberry Pi (PI2GO)
    Pi2Go - The Complete Robot for your Raspberry Pi

    No Soldering required - simply screws together

    Supports All models of Raspberry Pi (except very first release which has no mounting holes): Model A, Model B, Model A+, Model B+, Raspberry Pi 2 Model B and Raspberry Pi 3 Model B

    Have a look at the features:
    • No separate chassis - everything is connected to the  main circuit board
    • 5V switching regulator that can supply a fully loaded Pi as well as all the motors etc. on the Pi2Go
    • 2 DC motors
    • 3 x IR Obstacle sensors with indicator LEDs – detect objects within 10cm (left side, right side and front)
    • 2 x IR line sensors with indicator LEDs - program the Pi2Go to follow lines
    • Ultrasonic distance sensor - measure the distance to objects in front
    • Push button – non-dedicated switch use in you programs to change mode, switch off, or whatever you want
    • 4 pairs of fully controllable RGB LEDS - any colour, any brightness
    • 4 light sensors with analog to digital converter built in
    • 4 servo outputs controlled by onboard hardware
    • Active Power supply monitor: shuts down motors if battery getting low and sends signal to Pi if getting very low
    Software:
    • A python library module is available with some example programs
      • Move motors forwards, backwards, spin left/right or do sweeping turns
      • Read the values from all the IR sensors (On or Off)
      • Read the distance using the ultrasonic sensor
      • Read the value of the switch
      • Set the RGB LEDs to any colours you want
      • Set the position of each servo
    • ScratchGPIO version 7 and later fully supports Pi2Go

    Dimensions:
    • Main PCB 110 x 80mm
    • Wheels 65mm diameter
    • Assembled size approx: 155 x 140 x 90mm (L x W x H)

    Visit the Pi2Go website for assembly details, software downloads and news updates

    Add to Cart
    £55.00
  • Pan Tilt Kit for Pi2Go or Pi2Go-Lite and RPi Camera (PI2GO-PT)
    Pan & Tilt Assembly for Pi2Go or Pi2Go-Lite

    *Camera NOT included unless selected

    This is now produced in a snazzy RED colour PCB. Photos will be updated shortly...

    This kit supports both Version 1 and Version 2 of the Raspberry Pi Camera module

    NB. This kit requires some soldering to assemble. We offer a soldering service if selected

    Add a camera to your Pi2Go or Pi2Go-Lite with this easy-solder Kit. Build in three ways:
    • Fixed camera mount
    • Camera with Panning using 1 servo
    • Camera with both Pan and Tilt using 2 servos
    • Pan/Tilt supported in the Python library and ScratchGPIO

    Kit comprises:
    • Plates required to make any one of the three options
    • All screws required
    • Pillars to attach to the Pi2Go or Pi2Go-Lite
    • 200mm camera cable
    • 2 Tower Pro hobby servos. Choice of standard plastic gear SG90 or carbon fibre SG92R servos
    Software support for Pi2Go-Lite is provided in the Pi2Go python library and in ScratchGPIO
    The Pi2Go uses hardware servo control (better) which is supported in the Adafruit servo/PWM library

    See this link for instructions on assembling the kit:
    Add to Cart
    £12.50
  • Pi2Go-Lite Fully Integrated Robot Kit for Raspberry Pi (PI2GO-L)
    Pi2Go-Lite

    Soldering service is not available for this product
    (Please consider the Pi2Go if you do not want to solder..)

    Intermediate level soldering skills required for the kit. Not recommended for beginners

    Supports all models of Raspberry Pi

    An excellent all-in-one 2WD robot that comes complete with a multitude of sensors, runs off a single set of AA batteries and can be soldered and assembled in 90 minutes (depends on skill level and care taken! It is more important to get it right than build it fast).

    Can be built for both Raspberry Pi Model A/B or for Model A+ or B+ and Raspberry Pi 2 Model B. Simply change the mounting pillars to swap from one type to another

    Have a look at the features:
    • No separate chassis - everything is connected to the  main circuit board
    • 5V switching regulator that can supply a fully loaded Pi as well as all the motors etc. on the Pi2Go
    • 2 DC motors with either high 120:1 gear ratio (100rpom, more control, less speed) or the standard 48:1 gear ratio (240rpm, less control, more speed)
    • 2 x IR Obstacle sensors with indicator LEDs – detect objects within 10cm
    • 2 x IR line sensors with indicator LEDs - program the Pi2Go to follow lines
    • Ultrasonic distance sensor - measure the distance to objects in front
    • Push button – non-dedicated switch use in you programs to change mode, switch off, or whatever you want
    • 2 pairs of white LEDs - can use software PWM to vary the brightness
    • 2 servo outputs - useful for driving the add on Pan/Tilt assembly
    Software:
    • A python library module is available with some example programs
      • Move motors forwards, backwards, spin left/right or do sweeping turns
      • Read the values from all the IR sensors (On or Off)
      • Read the distance using the ultrasonic sensor
      • Read the value of the switch
      • Set the white LEDs on or off (vary brightness)
      • Set the position of each servo
    • ScratchGPIO version 6 and later fully supports Pi2Go-Lite

    Dimensions:
    • Main PCB 110 x 80mm
    • Wheels 65mm diameter
    • Assembled size approx: 155 x 140 x 90mm (L x W x H)

    Visit the Pi2Go website for build details, software downloads and news updates

    Also see The Raspberry Pi Guy's video tutorials



    Optional Extras:
    Wheel sensors. For accurate movement - straight lines and set angles, then wheel rotation sensors are a must. This addon pack comprises 2 wheel encoder discs to fit inside the main wheels, two IR reflectance sensors, a jumper block and 2 resistors. Software in both python and ScratchGPIO makes use of the 16 pulses per revolution to travel fixed distances etc.

    Pan & Tilt Kit for Raspberry Pi Camera. This kit comprises 5 small PCBs, 2 servos, 20cm camera cable, screws and pillars. This enables you to build: a) Fixed camera mount, b) Camera mount with simple panning left and right or c) Camera mount with both pan and tilt capability. Again, both the python library and ScratchGPIO  fully support this feature. The Pan Tilt kit is available with either standard (plastic gear) servos, or with carbon fibre gear servos (Camera is not included).
    Add to Cart
    £35.95
  • Wheel Sensors Encoder Kit for Pi2Go-Lite (PI2GO-WS)
    Wheel Encoders/Sensors for Pi2Go-Lite

    Add wheel encoders to your Pi2Go-Lite with this easy to solder kit.
    • Count 16 pulses per revolution
    • Be sure that you have travelled the distance you want
    • Program the Pi2Go-Lite so the left side travels the same distance as the right side - ie. travel in a straight line
    • Program your robot to make accurate turns by moving the 2 wheels different pre-determined distances

    Kit comprises:
    • 2 wheel encoder discs for fitting inside the wheels
    • 2 optical reflectance sensors
    • 4 resistors
    • Jumper block with 2 jumpers
    Software support is provided in the Pi2Go python library and in ScratchGPIO

    NB. Pi2Go-Lite kits shipped before 16th September will also require 2 capacitors, so please let us know if you require these.

    See this link for instructions on fitting the sensors:
    Add to Cart
    £4.95
Per Page      1 - 4 of 4

Powered by Abantecart eCommerce Solution