Search

Search Criteria

     

Products meeting the search criteria

Sort By:  
  • Ultimate 4tronix 4WD Robot Kit for Raspberry Pi & Initio - NO CHASSIS (INITULTPI-N)
    Ultimate Kit for Raspberry Pi and Initio

    NB: No Initio Chassis included in this Kit


    This kit is useful if you purchased the chassis elsewhere, or want to upgrade a basic kit to the "Ultimate" spec.

    No Soldering Required

    Kit Contents:
    • NOT INCLUDED: Initio Chassis
    • PiRoCon v1.3 Robotics Controller Board (fully assembled)
    • Pan-Tilt 2DOF Assembly with servos (Assembled)
    • 2 x IR Obstacle sensors
    • 2 x IR Line sensors
    • 1 x Ultrasonic sensor
    • WiFi dongle (Optional - select if required)
    • All connecting cables as required for above items
    • 4GB SD Card with ScratchGPIO and example sketches to run the robot (Optional - select if required)
    Initio Platform Details - REMEMBER this is NOT included in this kit
    • An extremely flexible and easy to use 4WD Robot platform designed by 4tronix especially for Arduino
    • Injection moulded from tough ABS
    • Built-in powerful 170-size motors and high-quality gearboxes
    • 6-cell battery box with switch, charging socket, wiring for motor driver and Arduino already in place
    • Built-in speed encoders on each side with electronics already fitted
    • Each wheel can be individually decoupled from the gearbox - run as 1WD, 2WD or 3WD if you want!
    • Fixings for stepper motors (28BYJ-48 as found in our shop - not included) so you can replace the DC Motors with stepper motors for greater accuracy
    • No soldering or gluing required - simply screw together and plug in the wires (of course you can add things we haven't thought of and they may need soldering)
    • The main chassis is delivered ready-built and all wires connected
    • All you need to do is add in the control boards and screw on the top plate
    • Mounting plates included for IR obstacle sensors and Line sensors
    • Loads of extra mountings for additional boards included
    • Build instructions, software, etc. >>HERE<<

    Here is a video showing the 4tronix Initio chassis with PiRoCon controller board

    Add to Cart
    £52.05
  • Ultimate 4tronix Initio 4WD Robot Kit for Raspberry Pi (INITULTPI)
    Ultimate Initio Kit for Raspberry Pi

    **Now with 4tronix RoboHAT ""

    No Soldering Required

    Kit Contents:
    • Main Initio chassis (with wheels, motors, gearboxes, battery box, wheel sensors, screws and all mountings)
    • RoboHAT Robotics Controller Board
    • Pan-Tilt 2DOF Assembly with servos (Ready Assembled)
    • 2 x IR Obstacle sensors
    • 2 x IR Line sensors
    • 1 x Ultrasonic sensor
    • WiFi dongle (Optional - select if required - Not Required for Raspberry Pi 3)
    • All connecting cables as required for above items
    • SD Card with Python and ScratchGPIO example sketches to run the robot (Optional - select if required)
    Initio Platform Details
    • An extremely flexible and easy to use 4WD Robot platform designed by 4tronix especially for Raspberry Pi and Arduino
    • Injection moulded from tough ABS
    • Built-in powerful 170-size motors and high-quality gearboxes
    • 6-cell battery box with switch, charging socket, wiring for motor driver and Arduino already in place
    • Built-in speed encoders on each side with electronics already fitted
    • Each wheel can be individually decoupled from the gearbox - run as 1WD, 2WD or 3WD if you want!
    • Fixings for stepper motors (28BYJ-48 as found in our shop - not included) so you can replace the DC Motors with stepper motors for greater accuracy
    • No soldering or gluing required - simply screw together and plug in the wires (of course you can add things we haven't thought of and they may need soldering)
    • The main chassis is delivered ready-built and all wires connected
    • All you need to do is add in the control boards and screw on the top plate
    • Mounting plates included for IR obstacle sensors and Line sensors
    • Loads of extra mountings for additional boards included
    • Build instructions, software etc, >>HERE<<

    Dimensions:
    • Wheels: Diameter 55mm, Thickness 28mm
    • Chassis (Excluding wheels): 180 x 120 x 93mm (length x width x height)
    • Height of top plate from ground with wheels attached: 110mm


    Here is a video showing the 4tronix Initio chassis (with older PiRoCon controller board)

    Add to Cart
    £84.05
  • Super 4tronix Initio 4WD Robot Kit for Raspberry Pi (INITSUPPI)
    Super Initio Kit for Raspberry Pi

    No Soldering Required

    Kit Contents:
    • Main initio chassis (with wheels, motors, gearboxes, battery box, wheel sensors, screws and all mountings)
    • PiRoCon Robotics Controller Board (Fully assembled)
    • 2 x IR Obstacle sensors
    • 2 x IR Line sensors
    • Mini-Breadboard (for mounting LEDs, etc)
    • 2 x superbright White LEDs and resistors
    • WiFi dongle (Optional - select if required)
    • All connecting cables as required for above items
    • 4GB SD Card with ScratchGPIO and example sketches to run the robot (Optional - select if required)
    Initio Platform Details
    • An extremely flexible and easy to use 4WD Robot platform designed by 4tronix especially for Arduino
    • Injection moulded from tough ABS
    • Built-in powerful 170-size motors and high-quality gearboxes
    • Arduino UNO, Mega2560, Leonardo and Raspberry Pi mount directly onto the base-plate
    • 6-cell battery box with switch, charging socket, wiring for motor driver and Arduino already in place
    • Built-in speed encoders on each side with electronics already fitted
    • Each wheel can be individually decoupled from the gearbox - run as 1WD, 2WD or 3WD if you want!
    • Fixings for stepper motors (28BYJ-48 as found in our shop - not included) so you can replace the DC Motors with stepper motors for greater accuracy
    • No soldering or gluing required - simply screw together and plug in the wires (of course you can add things we haven't thought of and they may need soldering)
    • The main chassis is delivered ready-built and all wires connected
    • All you need to do is add in the control boards and screw on the top plate
    • Mounting plates included for IR obstacle sensors and Line sensors
    • Loads of extra mountings for additional boards included
    • Build instructions and software etc. >>HERE<<

    Dimensions:
    • Wheels: Diameter 55mm, Thickness 28mm
    • Chassis (Excluding wheels): 180 x 120 x 93mm (length x width x height)
    • Height of top plate from ground with wheels attached: 110mm


    Here is a video showing the Initio chassis with PiRoCon controller board

    Add to Cart
    £69.55
  • 12V DC Trickle Charger for Initio Robot (ADAP-12VUK)
    12V DC power supply with correct connector for the Initio charging socket

    This is a trickle charge unit that can safely be left connected overnight,

    It will take around 10 hours to charge a set of 2000mAH cells and then will keep them topped up
    Add to Cart
    £4.95
  • Super 4tronix Initio 4WD Robot Kit for Arduino (INITSUPARD)
    This is the "Super" kit we have for our 4tronix Initio Platform and includes:
    • Main initio chassis (with wheels, motors, gearboxes, battery box, wheel sensors, screws and all mountings)
    • L298N Dual H-Bridge motor driver board
    • 2 x IR Obstacle sensors
    • 2 x IR Line sensors
    • 1 x Ultrasonic sensor
    • Mini-Breadboard (for mounting LDR light sensors, etc)
    • 4 x LDR light sensors
    • Arduino sensor shield
    • All connecting cables as required for above items
    Initio Platform Details
    • An extremely flexible and easy to use 4WD Robot platform designed by 4tronix especially for Arduino
    • Injection moulded from tough ABS
    • Built-in powerful 170-size motors and high-quality gearboxes
    • Arduino UNO, Mega2560, Leonardo and Raspberry Pi mount directly onto the base-plate
    • 6-cell battery box with switch, charging socket, wiring for motor driver and Arduino already in place
    • Built-in speed encoders on each side with electronics already fitted
    • Each wheel can be individually decoupled from the gearbox - run as 1WD, 2WD or 3WD if you want!
    • Fixings for stepper motors (28BYJ-48 as found in our shop - not included) so you can replace the DC Motors with stepper motors for greater accuracy
    • No soldering or gluing required - simply screw together and plug in the wires (of course you can add things we haven't thought of and they may need soldering)
    • The main chassis is delivered ready-built and all wires connected
    • All you need to do is add in the control boards and screw on the top plate
    • Mounting plates included for IR obstacle sensors and Line sensors
    • Loads of extra mountings for additional boards included
    • Build instructions and example code sketches >>HERE<<

    Dimensions:
    • Wheels: Diameter 55mm, Thickness 28mm
    • Chassis (Excluding wheels): 180 x 120 x 93mm (length x width x height)
    • Height of top plate from ground with wheels attached: 110mm
    Add to Cart
    £55.95
  • Ultimate 4tronix Initio 4WD Robot Kit for Arduino (INITULTARD)
    This is the ultimate kit we have for our 4tronix Initio Platform and includes:
    • Main initio chassis (with wheels, motors, gearboxes, battery box, wheel sensors, screws and all mountings)
    • L298N Dual H-Bridge motor driver board
    • Assembled Pan-Tilt 2DOF Assembly with servos
    • 2 x IR Obstacle sensors
    • 2 x IR Line sensors
    • 1 x Ultrasonic sensor
    • Mini-Breadboard (for mounting LDR light sensors, etc)
    • 4 x LDR light sensors
    • Arduino sensor shield
    • All connecting cables as required for above items
    Initio Platform Details
    • An extremely flexible and easy to use 4WD Robot platform designed by 4tronix especially for Arduino
    • Injection moulded from tough ABS
    • Built-in powerful 170-size motors and high-quality gearboxes
    • Arduino UNO, Mega2560, Leonardo and Raspberry Pi mount directly onto the base-plate
    • 6-cell battery box with switch, charging socket, wiring for motor driver and Arduino already in place
    • Built-in speed encoders on each side with electronics already fitted
    • Each wheel can be individually decoupled from the gearbox - run as 1WD, 2WD or 3WD if you want!
    • Fixings for stepper motors (28BYJ-48 as found in our shop - not included) so you can replace the DC Motors with stepper motors for greater accuracy
    • No soldering or gluing required - simply screw together and plug in the wires (of course you can add things we haven't thought of and they may need soldering)
    • The main chassis is delivered ready-built and all wires connected
    • All you need to do is add in the control boards and screw on the top plate
    • Mounting plates included for IR obstacle sensors and Line sensors
    • Loads of extra mountings for additional boards included
    • Build instructions and example code sketches >>HERE<<

    Dimensions:
    • Wheels: Diameter 55mm, Thickness 28mm
    • Chassis (Excluding wheels): 180 x 120 x 93mm (length x width x height)
    • Height of top plate from ground with wheels attached: 110mm
    Add to Cart
    £76.55
  • Ultimate 4tronix Initio 4WD Robot Kit for Arduino - NO CHASSIS (INITULTARD-NI)
    This is the ultimate kit we have for our 4tronix Initio Platform and includes:

    NOTE: INITIO CHASSIS NOT INCLUDED
    • L298N Dual H-Bridge motor driver board
    • Assembled Pan-Tilt 2DOF Assembly with servos
    • 2 x IR Obstacle sensors
    • 2 x IR Line sensors
    • 1 x Ultrasonic sensor
    • Mini-Breadboard (for mounting LDR light sensors, etc)
    • 4 x LDR light sensors
    • Arduino sensor shield
    • All connecting cables as required for above items
    Initio Platform Details - NB. Initio Chassis NOT included in this listing
    • An extremely flexible and easy to use 4WD Robot platform designed by 4tronix especially for Arduino
    • Injection moulded from tough ABS
    • Built-in powerful 170-size motors and high-quality gearboxes
    • Arduino UNO, Mega2560, Leonardo and Raspberry Pi mount directly onto the base-plate
    • 6-cell battery box with switch, charging socket, wiring for motor driver and Arduino already in place
    • Built-in speed encoders on each side with electronics already fitted
    • Each wheel can be individually decoupled from the gearbox - run as 1WD, 2WD or 3WD if you want!
    • Fixings for stepper motors (28BYJ-48 as found in our shop - not included) so you can replace the DC Motors with stepper motors for greater accuracy
    • No soldering or gluing required - simply screw together and plug in the wires (of course you can add things we haven't thought of and they may need soldering)
    • The main chassis is delivered ready-built and all wires connected
    • All you need to do is add in the control boards and screw on the top plate
    • Mounting plates included for IR obstacle sensors and Line sensors
    • Loads of extra mountings for additional boards included
    • Build instructions and example code sketches >>HERE<<

    Dimensions:
    • Wheels: Diameter 55mm, Thickness 28mm
    • Chassis (Excluding wheels): 180 x 120 x 93mm (length x width x height)
    • Height of top plate from ground with wheels attached: 110mm
    Add to Cart
    £44.55
  • 4tronix Initio 4WD Robotics Chassis (INITIO)
    The Initio has been designed by 4tronix especially for use with the Arduino and Raspberry Pi. Multiple supporting products are also available in our shop, including motor driver boards, sensor shields for Arduino and PiRoCon robotics controller board for Raspberry Pi.

    Features:
    • An extremely flexible and easy to use 4WD Robot platform designed by 4tronix especially for Raspberry Pi and Arduino
    • Injection moulded from tough ABS
    • Built-in powerful 170-size motors and high-quality gearboxes
    • Arduino (UNO, Mega2560 or Leonardo) and Raspberry Pi mount directly onto the base-plate
    • 6-cell battery box with switch, charging socket, wiring for motor driver and Arduino already in place
    • Built-in speed encoders on each side with electronics already fitted
    • Each wheel can be individually decoupled from the gearbox - run as 1WD, 2WD or 3WD if you want!
    • Fixings for stepper motors (28BYJ-48 as found in our shop - not included) so you can replace the DC Motors with stepper motors for greater accuracy
    • No soldering or gluing required - simply screw together and plug in the wires (of course you can add things we haven't thought of and they may need soldering)
    • The main chassis is delivered ready-built and all wires connected
    • All you need to do is add in the control boards and screw on the top plate
    • Mounting plates included for IR obstacle sensors and Line sensors
    • Loads of extra mountings for additional boards included
    • Build instructions and example code >>HERE<<

    Dimensions:
    • Wheels: Diameter 55mm, Thickness 28mm
    • Chassis (Excluding wheels): 180 x 120 x 93mm (length x width x height)
    • Height of top plate from ground with wheels attached: 110mm

    Video using the Initio platform with a Raspberry Pi

    Add to Cart
    £32.00
  • ABS Mounting Plate (Initio deck) 180 x 120mm (BBDHOLD)
    Mounting Board with Breadboard for Arduino or Raspberry Pi
    • A great way to mount your Arduino or Raspberry Pi with a half-size breadboard
    • Ideal for GPIO experiments on Raspberry Pi as well as all types of experiments with Arduino
    • This is our universal baseplate, injected moulded from tough, black ABS
    • Breadboard Optional
    • Supports Arduino Uno, Leonardo, Mega2560, Due, Yun as well as Raspberry Pi (Rev B with mounting holes)
      • NB. For Raspberry Pi you should use an offset standoff (included) for the central mounting hole
    • Size 180 x 120mm

    Add to Cart
    £2.45
Per Page      1 - 9 of 9

Powered by Abantecart eCommerce Solution