Genuino/Arduino

Sort By:  
  • Genuino Uno Rev3 (Arduino) (GENUNO)

    Genuino (Arduino) Uno Rev3

    Code: GBX00066

    Genuino, the new name for Genuine, Official Arduino


    The Genuino UNO R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The UNO differs from all preceding boards because it does not use the FTDI USB-to-serial driver chip.

    Genuino Uno and Arduino Uno share the same components, characteristics and quality of manufacturing. They are actually the same board under a different brand. Depending on the area of the world where you live you’ll be able to purchase an Arduino Uno or a Genuino Uno. Learn more.

    Learn more about the Uno.

    Technical specifications

    Microcontroller ATmega328
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limit) 6-20V
    Digital I/O Pins 14
    PWM Digital I/O Pins 6
    Analog Input Pins 6
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB
    Flash Memory for Bootloader 0.5 KB
    SRAM 2 KB
    EEPROM 1 KB
    Clock Speed 16 MHz

     

    Add to Cart
    £18.65
  • Genuino Micro (Arduino) (GENMICRO)

    Genuino (Arduino) Micro

    Code: GBX00053

    Genuino, the new name for Genuine, Official Arduino

     


    Genuino Micro is a microcontroller board based on the ATmega32u4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

    The Micro is similar to the Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. Find more informations about the Genuino Micro here.

    Genuino Micro and Arduino Micro share the same components, characteristics and quality of manufacturing. They are actually the same board under a different brand. Depending on the area of the world where you live you’ll be able to purchase an Arduino Micro or a Genuino Micro. Learn more.

    Technical specifications

    Microcontroller ATmega32u4
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limit) 6-20V
    Digital I/O Pins 20
    PWM Digital I/O Pins 7
    Analog Input Pins 12
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB
    Flash Memory for Bootloader 4 KB
    SRAM 2.5 KB
    EEPROM 1 KB
    Clock Speed 16 MHz

     

    Add to Cart
    £13.70
  • Genuino ZERO (Arduino) (GENZERO)

    Genuino (Arduino) ZERO

    Code: GBX00003

    Genuino, the new name for Genuine, Official Arduino

     


    Genuino Zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a variety of project opportunities for devices, and acts as a great educational tool for learning about 32-bit application development. The Zero applications span from smart IoT devices, wearable technology, high-tech automation, to crazy robotics. The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core. One of its most important features is Atmel’s Embedded Debugger (EDBG), which provides a full debug interface without the need for additional hardware, significantly increasing the ease-of-use for software debugging. EDBG also supports a virtual COM port that can be used for device programming and traditional Arduino boot loader functionality.

    Find more informations about the Genuino Zero here.

    Genuino Zero and Arduino Zero share the same components, characteristics and quality of manufacturing. They are actually the same board under a different brand. Depending on the area of the world where you live you’ll be able to purchase an Arduino Zero or a Genuino Zero. Learn more.

    Technical specifications

    Microcontroller ATSAMD21G18, 32-Bit ARM Cortex M0+
    Operating Voltage 3.3V
    Input Voltage (recommended) from 7 to 12 Volts
    Digital I/O Pins 20
    PWM Digital I/O Pins All but pins 2 and 7
    Analog Input Pins 6, 12-bit ADC channels
    Analog Output Pins 1, 10-bit DAC
    DC Current per I/O Pin 7 mA
    Flash Memory 256 KB
    SRAM 32 KB
    Clock Speed 48 MHz

     

    Add to Cart
    £32.45
  • Genuino Mega2560 Rev3 (Arduino) (GENMEGA)

    Genuino (Arduino) Mega2560 Rev3

    Code: GBX00067

    Genuino, the new name for Genuine, Official Arduino


    The Genuino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Uno, Duemilanove or Diecimila.

    Genuino Mega and Arduino Mega share the same components, characteristics and quality of manufacturing. They are actually the same board under a different brand. Depending on the area of the world where you live you’ll be able to purchase an Arduino Mega or a Genuino Mega. Learn more.

    Additional features coming with the R3 version are:

    • ATmega16U2 instead 8U2 as USB-to-Serial converter
    • 1.0 pinout: added SDA and SCL pins for TWI communication placed near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board and the second one is a not connected pin, that is reserved for future purposes
    • stronger RESET circuit

    Find more information about the Genuino Mega here.

    Technical specifications

    Microcontroller ATmega2560
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limit) 6-20V
    Digital I/O Pins 54
    PWM Digital I/O Pins 14
    Analog Input Pins 16
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 256 KB
    Flash Memory for Bootloader 8 KB
    SRAM 8 KB
    EEPROM 4 KB
    Clock Speed 16 MHz

     

    Add to Cart
    £26.60
Per Page      1 - 4 of 4

Powered by Abantecart eCommerce Solution