Arduino

Sort By:  
  • Arduino Micro (A000053)

    Arduino Micro

    Code: A000053

    The Arduino Micro is a microcontroller board based on the ATmega32u4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.

    The Micro is similar to the Arduino Leonardo in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board; these are detailed on the getting started page.

    Technical Specifications

    Microcontroller ATmega32u4
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limits) 6-20V
    Digital I/O Pins 20
    PWM Channels 7
    Analog Input Channels 12
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB (ATmega32u4) of which 4 KB used by bootloader
    SRAM 2.5 KB (ATmega32u4)
    EEPROM 1 KB (ATmega32u4)
    Clock Speed 16 MHz

    If you want to give a closer look to this board we advise you to visit the official Arduino Micro page in the Products Section.

    Add to Cart
    £15.40
  • Arduino Mega2560 Rev 3 (A000067)

    Arduino Mega2560 Rev3

    Code: A000067

    The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Uno, Duemilanove or Diecimila.

    The Mega 2560 is an update to the Arduino Mega, which it replaces.

    Additional features coming with the R3 version are:

    • ATmega16U2 instead 8U2 as USB-to-Serial converter.
    • 1.0 pinout: added SDA and SCL pins for TWI communication placed near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board and the second one is a not connected pin, that is reserved for future purposes.
    • stronger RESET circuit.

    Technical Specifications

    Microcontroller ATmega2560
    Operating Voltage 5V
    Input Voltage (recommended) 7-12V
    Input Voltage (limits) 6-20V
    Digital I/O Pins 54 (of which 14 provide PWM output)
    Analog Input Pins 16
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 256 KB of which 8 KB used by bootloader
    SRAM 8 KB
    EEPROM 4 KB
    Clock Speed 16 MHz

    If you want to give a closer look to this board we advice you to visit the official Arduino Mega 2560 page in the Hardware Section.

    Add to Cart
    £29.95
  • Arduino W5100 Ethernet Shield Rev 3, PoE Ready (A000072)

    The NEW Arduino Ethernet shield Rev3 allows an Arduino board to connect to a LAN using the  Ethernet library.

    The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

    New available features:
         Micro SD card connector with active voltage translators
         Power Over Ethernet ready
         On board reset controller
         NOW Compatible with the Arduino MEGA board

    SUPPLIED WITHOUT PoE MODULE
    Add to Cart
    £22.45
Per Page      1 - 3 of 3

Powered by Abantecart eCommerce Solution