Motors & Servos
-
6V Geared Motor, 1:48, 240RPM Single Shaft (GRMTR48-240)6V DC Geared Motor
As used in many simple 2WD robots- 48:1
- Single shaft
- Nominally 6V operation
- Approx 240rpm at 6V
Add to Cart£2.50 -
N20 Micro Metal Geared Motor 6V Various Speeds (N20-nnn)Micro Metal Geared Motor
As used in our CrumbleBots, Picobots, Agobo, Lumino robots
Simple to use, low starting voltage around 2V. Nominally speed is on load (with wheel) at 6V and around 160mA off load
Also available - nylon mounting bracket with screws
N20 size motor.
Volts No Load
RPMOn Load
RPMTorque
kg.cmRated
mAStall
TorqueStall
mARatio 6 500 400 0.15 160 1.2 100 30 6 300 240 0.2 160 1.6 100 50 6 150 120 0.3 160 2.4 200 100 6 100 80 0.4 160 3.2 200 150 6 60 48 1.0 120 7 200 250 6 50 40 1.5 120 10 300 298 Add to Cart£5.00 -
6V basic DC Motor ()
- 3V - 6V rated motor
- Motor diameter: 20.7mm
- Body length: 25mm
- Shaft diameter: 2mm
- Shaft length: 8.25mm
Add to Cart£1.00 -
Mounting Bracket for our Mini Pan/Tilt Assembly and Camera, UltraSonic, etc. (PTBRKT)Bracket for our Mini Pan/Tilt Assembly Enabling Easy Mounting for Small Cameras, Ultrasonic, etc.
- Simply clips onto the front of our mini Pan/Tilt assembly
- Can easily be removed by unclipping. So you can have multiple items ready mounted and easily swap between them
- Injection moulded in black ABS especially for 4tronix
- Plate dimensions: 48 x 37mm
- Ideal for mounting our mini breadboards
- Can mount the Raspberry Pi Camera using 2 screws - see photo
- One bracket is included
- Raspberry Pi Camera and Initio not included
Add to Cart£1.50 -
5V 4-Phase Stepper Motor with OPTIONAL ULN2003 Control Board (RPI-STEP)Stepper Motor
- Model: 28BYJ48
- Operating voltage: 5V
- Step angle: 5.625°
- Reduction ratio: 64
- Pull-in Torque: >300gf.cm
- Max starting frequency: 500pps
- Max operating frequency: 900pps
- Diameter: 28mm
- Comes with a 5-way cable terminated in 2.54mm pitch JST female plug
- 4-Phase (A, B, C, D) LED indication
- Size: 31 x 35mm
Specification and Dimensions >>HERE<<
We also have WHEELS that can be fitted directly to the stepper motor shaftAdd to Cart£2.50 -
Tower Pro SG90 Micro Servo (SG90)
- Model Tower Pro SG90
- Dimensions: 22 x 11.5 x 27mm
- Operating speed: 0.12secs / 60 degrees (no load, 4.8V)
- Stall torque: 1.2 kg/cm (4.8V)
- Operating voltage: 3V - 7.2V
- 3 servo horns included per servo
Add to Cart£2.90 -
48:1 Geared Motor 6V Dual Shaft (GRMTR1)6V DC Geared Motor
As used in many simple 2WD robots- 48:1 Gearing
- Nominally 6V operation
- Approx 200 rpm at 6V
Add to Cart£2.50 -
Tower Pro SG92R Micro Servo Motor with Carbon Fibre Gears (SERV92R)Tower Pro Micro Servo: SG92R
- Model: Tower Pro SG92R
- Carbon fibre gears and control arms (horns)
- Dimensions: 22.8 x 12.6 x 26.8mm
- Operating speed: 0.12secs / 60 degrees (no load, 4.8V), 0.08secs / 60 degrees (no load, 6V)
- Operating voltage: 3V - 7.2V
- Torque: 2.5 kg/cm (4.8V), 3.2 kg/cm (6V)
- 3 servo horns included per servo
Add to Cart£3.50 -
Assembled 2 DOF Pan and Tilt Brackets and Servos for Robotics (PANTILT02A)Lightweight Pan and Tilt set complete with micro servos
- Fully Assembled mini Pan and Tilt arm for robot or miniature camera mount
- Tower Pro 9g micro servos included and ready fitted
- Mount for camera or sensors is 30 x 30mm
- Easy mount (flat) base plate
- Fully assembled
- Total weight including servos: 44g
- Clip on mounting plate with screws for Raspberry Pi camera
- Raspberry Pi Camera (standard or NOIR)
- Additional camera cable (15cm included with Camera)
Add to Cart£15.80