Tools & Equipment

Sort By:  
  • Precision Straight Fine Tip Tweezers (TLTW02)
    A professional quality set of tweezers. Ideal for fine work such as surface mount components

    When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers.

    These are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to pick up any size component.

    This particular model is 120mm long with a 9mm / 0.35" gap at the tips while open, this allows it to pick up components with better precision for placement and steadying during soldering
    Add to Cart
    £3.95
  • Precision Curved Fine Tip Tweezers (TLTW01)
    A professional quality set of tweezers. Ideal for fine work such as surface mount components

    When soldering small surface-mount (SMD/SMT) components, one thing you'll need is a good pair of tweezers.

    These are a great pair of every-day tweezers. They're anti-static, anti-magnetic and made of hard stainless steel. The tips are fine and pointy to pick up any size component.

    This particular model is 120mm long with a 9mm / 0.35" gap at the tips while open, this allows it to pick up components with better precision for placement and steadying during soldering
    Add to Cart
    £3.95
  • Stickvise PCB Vise (PCB Vice) (STVISE)

    Are you still looking for that perfect PCB holder? The low profile PCB Stickvise might be just the thing you need!

    In performing the simple task of holding a PCB near table level, the Stickvise is great because your hands can rest directly on the table, allowing you to steady yourself with minimal effort for fine soldering and probing. The Stickvise also fits easily under a microscope and keeps PCBs consistently in focus.

    Set the width slightly smaller than the size of your work-piece, compress the spring, slide your PCB into place, and release the springs. Easy, fast, and repeatable.

    While the design is simple, it doesn't limit you and is totally hackable. The nylon jaws that come with the vise hold a PCB 5mm or so from the shaft, giving you clearance for most layouts. If you need something a little taller, there are 3D printable designs on the site for taller jaws, jaws with slots to keep cables out of the way, and even High Temperature PTFE Jaws.

    Features

    • Hold your PCB flat -- give your arms a rest! Stickvise is not up in the air, it holds your circuit board flat so you can solder with stability at table level.
    • Simple design -- No half baked features or gimmicks, Stickvise just holds a circuit board in a simple, intuitive way.
    • Hackable -- have a special application? 3D print custom jaw plates or choose from many more tested mods to make Stickvise work for your application.
    • Comes with one set of standard nylon jaws.
    Add to Cart
    £26.95
  • PTFE Jaws for Stickvise (STJAWS)

    Are you concerned that your smokin' hot soldering skills will set your project alight? There is no more need to fear the heat! These High-Temperature PTFE Jaws are a great hack for your PCB Stickvise, keeping your board safe from incineration.

    Made from Teflon, their main advantage is high temperature resistance. You can take a hot soldering iron and touch it directly to the jaw plates without leaving a mark. Neat! Or should we say... ~cool~

    Does not include PCB vice.

    Add to Cart
    £15.50
  • DT830L Digital Multimeter DMM DVM (DMM01)
    DC VOLTAGE
    • Display: Blue Backlight LCD, 1999 counts, updates 2-3/sec
    • Measuring method: Dual-slope integration A/D Converter
    • Operating Environment: 0 to 40 °C
    • Storage Temperature: -10°C to 50°C
    • Power: 9V Battery, NEDA 1604 or 6F22 Type
    • Fuse Protection: 200mA/250V
    • Size: 138mm x 69mm x 31mm
    • Weight: Approx. 280g
    • Measurement Range 200VmV-600V
    • ±0.5% of rdg ± 2 digits
    • Overload Protection: 250V rms
    AC VOLTAGE
    • Measurement Range 200V-600V
    • ±1.2% ± 10 digits
    • Overload Protection: 600VDC or rms
    DC CURRENT
    • Measurement Range DC 2000-10A
    • ±1% of rdg ± 2 digits
    • Overload Protection: F 200mA/250V fuse (10A range unfused)
     
    RESISTANCE
    • Measurement Range 200 Ohms - 2M Ohms
    • ±0.8% of rdg ± 3 digits
    • Maximum Open Circuit Voltage: 3.2V
    • Overload Protection: 250VDC or rms
    TRANSISTOR
    • Measurement Range hFE TEST (0-1000)
    .................................................
    Package Contents:
    .................................................
    Digital Multimeter
    Set of test leads
    Battery.
    Add to Cart
    £4.95
  • RasPIO GPIO PCB Ruler 6" (GPIORUL)

    The RasPiO® GPIO Ruler…

    • is the ideal quick reference for RPi.GPIO hacking on the Raspberry Pi in Python
    • has all the most commonly used RPi.GPIO code, which can be hard to remember
    • is a Raspberry Pi port identification aid (GPIO numbers and Alt functions)
    • can be used as a ruler (cm/inches)
    • fits easily in a pencil case, toolbox or desk tidy
    Add to Cart
    £4.00
  • 40W Soldering Iron - Fine Tip (TLIRON01)
    An excellent starter iron with a fine tip for electronic components
    • Powerful 40W ceramic element
    • White LED illuminates the soldering area
    • Blue Handle
    • UK plug
    Add to Cart
    £7.50
  • Adafruit PCB Ruler 15cm 6 inch (ADA-RULER)
    Bring out the inner Geek!

    The first time you soldered up a surface mount component you may have been surprised "these are really small parts!" and there's dozens of different names too! QFN, TDFN, SOIC, SOP, J-Lead, what do they mean and how can you tell how big they are? Now you can have a reference board at your fingertips, with this snazzy PCB reference ruler.

    Measuring approx 1" x 6", this standard-thickness FR4, gold plate ruler has the most common component packages you'll encounter. It also has font size guide, trace-width diagram, and a set of AWG-sized drills so you can gauge your wire thicknesses. Edges are labeled in inches with 1/8th marks and cm with 0.1cm marks.
    Add to Cart
    £3.30
  • Scope Probe Test Clip MCX for Arm Nano Oscilloscope (PRBCLIP)
    Scope Probe Test Clip MCX for Arm Nano Oscilloscope

    • Test clip style probe
    • Correct MCX connector for DSO201 and DSO203 scopes
    Add to Cart
    £3.95
  • Pair of 100MHz Scope Probes (PRB100)
    Pair of 100MHz Oscilloscope Probes
    • X1 - X10 switchable
    • Accessories: IC tips, earth clip and coloured rings (colours vary)
    • Packed in pairs
    • Attenuation Ratio: 1X/10X
    • Input Resistance: 1MΩ:10MΩ
    • Input Capacitance: 1X: 85pF-135pF     10X: 16pF-20pF
    • Compensation Range: 10pF-35pF
    • Bandwith : 1X: DC 6MHZ      10X: 100MHZ
    • Working Voltage: 1X : ≤300V DC      10X: ≤ 600V DC
    • Operating temperature: -10℃ to +50℃
    • Non-Operating temperature: -20℃ to +75℃
    • Humidity: ≤85% relative humidity
    Includes
    • 2x 100MHz probes
    • 2x IC tips
    • 2x plain tips
    • Yellow, Green, Blue and Red identification rings
    • 2x earth clips
    • Compensation adjuster
    Add to Cart
    £13.30
  • Budget Desoldering Pump ESD - Solder Sucker (TLSS02)
    A desoldering pump / solder sucker
    • Black plastic body with metal plunger
    • ESD safe (antistatic)
    • PTFE nozzle
    • Length 194mm
    • Diameter 22mm
    Add to Cart
    £1.85
  • DT830B Digital Multimeter DMM DVM (DMM02)
    The DT830B Digital Multimeter is a very affordable and handy piece of test equipment. It features an easy to read 3.5 digit LCD display. It is equipped with 5 functions and 19 ranges, each test position is quickly and easily selected with a simple turn of the single selector switch.

    Measure DC voltage in these ranges:  200 mV 2000mV, 20V, 200V and 1000V.
    Measure DC current in these ranges:  200A, 2000A, 20ma, 200ma and 10A.
    Measure AC voltage in these ranges:  200 V and 750 V.
    Measure resistance in these ranges:  200, 2000 ohms, 20, 200 and 2000 Kohms.

    It also has a built-in diode test and transistor test feature.

    Only 2.8 x 5 x 1 inches 6 oz. (70x126x24mm 170g).

    Test leads and Battery are Included
    Add to Cart
    £3.95
  • Wire Cutters and Strippers (TLWS01)
    A basic wire stripper and cutter for general hobby use:
    • Top Quality Material
    • Spring Return Handle
    • Tempered Steel Cutting Edge
    • Suitable for 10-30AWG Wire (0.5 - 4.0mm Wire)
    Add to Cart
    £3.95
  • DT830D Digital Multimeter DMM DVM (DMM03)
    DT830D Digital Multimeter

    GENERAL
    • Operating Environment: 0 to 40 °C
    • Storage Temperature: -10°C to 50°C
    • Power: 2 x AAA (included)
    • Fuse Protection: 200mA/250V
    • Size: 126mm x 70mm x 27mm
    • Weight: Approx. 120g
    DC VOLTAGE
    • Measurement Range 200mV - 500V
    • ±0.5% of rdg ± 2 digits
    • Overload Protection: 250V rms
    AC VOLTAGE
    • Measurement Range 200V - 500V
    • ±1.2% ± 10 digits
    • Overload Protection: 600VDC or rms
    DC CURRENT
    • Measurement Range DC 2mA - 10A
    • ±1% of rdg ± 2 digits
    • Overload Protection: F 500mA / 250V fuse (10A range has 10A fuse)
     
    RESISTANCE
    • Measurement Range 200 Ohms - 2M Ohms
    • ±0.8% of rdg ± 3 digits
    • Maximum Open Circuit Voltage: 3.2V
    • Overload Protection: 250VDC or rms
    OTHER
    • Transistor Measurement Range hFE TEST (0-1000)
    • Continuity buzzer
    • Diode test

    Package Contents:
    • Digital Multimeter
    • Set of test leads
    • Transistor tester
    • Batteries
    Add to Cart
    £5.95
  • Precision Side Cutters - 130mm (TLSC02)
    A professional quality pair of micro side-cutters
    • Cutting Capacity Max: 1.3mm
    • Cutting Edge Hardness: 21°
    • Overall Length: 130mm
    • Blade Angle: 21°
    • Blade Length: 8mm
    • Copper Wire Cutting Capacity: 1.3mm
    • Handle Type: Thermal Plastic Rubber
    • Length: 130mm
    • Material: Carbon Steel
    Add to Cart
    £5.95
  • Precision Long Nosed Pliers - 150mm (TLPL02)
    A professional quality pair of small long-nosed pliers
    • Blade Length: 29mm
    • Handle Type: Thermal Plastic Rubber
    • Jaw Length: 10mm
    • Jaw Opening Max: 10mm
    • Jaw Type: Long Nose
    • Length: 150mm
    • Material: Carbon Steel
    • Overall Length: 150mm
    Add to Cart
    £5.95
  • 11 Piece Jewellers Screwdriver Set (TLDR01)
    11 Piece Precision Screwdriver Set Supplied in a Case with a Durable Hinge and a Snap Shut Fastener

    An 11 piece precision screwdriver set manufactured with steel blades which have precision ground tips and metallic handles with a rotating tip. The kit is supplied in a moulded, impact resistant case with a durable hinge and a snap shut fastener.
    • 6 x Slotted Screwdrivers, 1, 1.2, 1.4, 1.8, 2.4, and 3mm
    • 3 x Phillips Screwdrivers, PH00, PH0 and PH1
    • 1 x Pointing Awl
    • 1 x Magnetic Pick-up Tool
    Add to Cart
    £4.95
  • Small Side Cutters - 105mm (TLSC01)
    A basic set of pliers useful for working with small components
    • Rubberised handles
    • 105mm long
    • 12mm cutters
    Add to Cart
    £1.95
  • 6" Steel Ruler - 15cm Rule (RULE6)
    Stainless steel rule marked in both inches and cm/mm
    Add to Cart
    £1.50
  • Antex XS25 Soldering Iron 25W (UK Plug) (XS25)
    Antex XS25 Soldering Iron 25W (UK Plug)
    • Nominal Power - 25 watts
    • 230V UK plug
    • Supplied with long-life iron plated bit
    • Antex 50 bit is fitted to this iron (2.3mm)
    • An inner ceramic shaft provides near perfect insulation
    • A range of alternative sized bits are also available
    • Supplied complete with 2.3mm bit, 1.5m of cable and full instructions
    • CE marked
    Add to Cart
    £19.95
Per Page      1 - 20 of 21

Powered by Abantecart eCommerce Solution