Kits

Sort By:  
  • Arduino Project Handbook: Volume one: Complete Guide to Creating with the Arduino (BK-ARDPROJ)
    There is no VAT on this book

    This is the must have Arduino Project Handbook with 45 cool projects to create detailed in full colour.

    Every maker and tinkerer should own a copy!

    What is the Arduino Project Handbook?
    It's a full colour reference book for 45 exciting and practical projects for the Arduino Microcontroller. If you are reading this then you probably already have an idea of what the Arduino is. For those that don't, it's an inexpensive small computer that can be programmed to control endless creations limited only by your imagination.

    It's used by artists and makers to bring their creations to life. A lie detector, programmable rocket launcher, motion sensor alarm, reaction timer, electronic dice, keypad entry system, laser trip wire alarm, robot, Wireless ID card system, range finder and defusable bomb game are just some of the cool projects that this book will demonstrate how to build. All are easily achievable and have one thing in common - they use the power of the Arduino.

    NB. No VAT is applied to this book
    Add to Cart
    £9.50
  • Datalogger & Ultrasonic Sensor Kit for Arduino (ARD-LOGSON)
    This is a Kit Combining all components in Our 4-Sensor Data Logger and our Ultrasonic RangeFinder Kit:
    Both projects can be built  - but not at the same time (also, note the changes required for the I2C display)
    • A variety of Arduino and clone boards are available for selection
    • USB lead for selected Arduino
    • Large 830 tie-point Prototype Board (with dual power rails on each side - picture is incorrect)
    • Prototyping Male-Male jumper Wires:
      • 20cm x 4
      • 16cm x 4
      • 12cm x 8
      • 8cm x 49
    • 25 x Resistors:
      • 100R x 5
      • 220R x 5
      • 330R x5
      • 1K x 5
      • 10K x 5
    • 15 x Diffuse 3mm LEDs:
      • Red x 5
      • Green x 5
      • Yellow x 5
    • General Purpose Diode: 1N4148
    • Mini push-button switches x 5
    • Miniature speaker
    • 9V Battery lead to provide power on the move (complete with connector to plug directly into Arduino)
    • 16X2 LCD Module with blue backlight (I2C cable provided - no sodlering required!)
    • 10K potentiometer for setting contrast on LCD Module
    • LM35DZ temperature sensor (including noise reducing capacitor)
    • 2X Light dependent resistor (50K - 2M resistance variation 10 lux to dark)
    • DHT11 Digital Humidity and Temperature sensor
    • Tilt switch (non-mercury, switches ON when more than 10 degrees from horizontal)
    • HC-SR04 Ultrasonic Distance Sensor included
    Build a complete environmental datalogger or sensor array: Data Logger Code - see photo below
    Also you can build the ultrasonic rangefinder instead - or many combinations!
    Please check our support site for Arduino kits
    Add to Cart
    £16.70
  • Super Sensor & Motor Kit for Arduino (ARD-SUP)
    Please check our Arduino Support Website
    • 2 x Prototype Boards
      • 400 tie-point with 2 power distribution strips on each side
      • 830 tie-point with 2 power distribution strips on each side
    • Prototyping Male-Male jumper Wires:
      • 20cm x 4
      • 16cm x 4
      • 12cm x 8
      • 8cm x 49
    • 25 Resistors:
      • 100R x 5
      • 220R x 5
      • 330R x 5
      • 1K x 5
      • 10K x 5
    • Diffuse 3mm LEDs:
      • Red x 5
      • Green x 5
      • Yellow x 5
    • 1 x General Purpose Diodes: 1N4148
    • Mini push-button switches x 5
    • Miniature speaker
    • 9V Battery lead to provide power on the move (complete with connector to plug directly into Arduino)
    • 16X2 LCD Module with blue backlight (16-pin header provided to enable direct plugging into breadboards)
    • 10K (or other value) preset  mini-potentiometer for setting contrast on LCD Module
    • 10K large potentiometer for analog input experiments
    • LM35DZ temperature sensor (including noise reducing capacitor)
    • 2 x Light dependent resistors (50K - 2M resistance variation 10 lux to dark)
    • DHT11 Digital Humidity and Temperature sensor
    • Tilt switch (non-mercury, switches ON when more than 10 degrees from horizontal)
    • UltraSonic distance measuring sensor
    • 2 x Stepper motors with ULN2003 control boards
    • 20 x Male to Female 20cm jumper wires to connect the control boards to a breadboard
    • DUAL 0.56" high 7-segment LED
    • QUAD 0.56" high t-segment LED
    • 8 x 8 Dual Red/Green LED Matrix
    Example Code:

    Optional extra: Arduino Project Handbook. A full colour guide with 45 sample projects showing how to make the projects and program the Arduino. Every Arduino maker should have one!
    Add to Cart
    £34.15
  • Ultimate Sensor & Motor Kit for Arduino (ARD-ULT)
    Please check our Arduino Support Website
    ** Presented in a smart, multi-compartment project box - makes an ideal gift **
    • 3 x Prototype Boards
      • 170 tie-point "mini-breadboard" for mounting sensors separately
      • 400 tie-point with 2 power distribution strips on each side
      • 830 tie-point with 2 power distribution strips on each side
    • Prototyping Male-Male jumper Wires:
      • 20cm x 4
      • 16cm x 4
      • 12cm x 8
      • 8cm x 49
    • 25 Resistors:
      • 100R x 5
      • 220R x 5
      • 330R x 5
      • 1K x 5
      • 10K x 5
    • Diffuse 3mm LEDs:
      • Red x 5
      • Green x 5
      • Yellow x 5
    • General Purpose Diode: 1N4148
    • Mini push-button switches x 5
    • Miniature speaker
    • 9V Battery lead to provide power on the move (complete with connector to plug directly into Arduino)
    • 16X2 LCD Module with blue backlight (16-pin header provided to enable direct plugging into breadboards)
    • 10K trim potentiometer for setting contrast on LCD Module
    • 10K large potentiometer for use as analog input device
    • LM35DZ temperature sensor (including noise reducing capacitor)
    • 4 x Light dependent resistors (50K - 2M resistance variation 10 lux to dark)
    • DHT11 Digital Humidity and Temperature sensor
    • Tilt switch (non-mercury, switches ON when more than 10 degrees from horizontal)
    • UltraSonic distance measuring sensor
    • 2 x Stepper motors with ULN2003 control boards
    • DUAL 0.56" high 7-segment LED
    • QUAD 0.56" high t-segment LED
    • 8 x 8 Dual Red/Green LED Matrix
    • 2 x 74HC595 8-bit shift registers to increase the number of output pins you can use
    • Infra Red Kit containing remote controller, IR transmitter/emitter and IR Receiver/decoder
    • Tower Pro 9g Micro servo
    • SD Card Reader
    Optional extra: Arduino Project Handbook. A full colour guide with 45 sample projects showing how to make the projects and program the Arduino. Every Arduino maker should have one!
    Add to Cart
    £50.00
  • Basic Essentials Starter Kit for Arduino (ARD-ESS)
    Please check our Arduino Support Website

    Our special Basic Essentials Pack:

    • Large prototype board 830 tie point with dual power rails on each side
    • 65 Prototyping jumper leads (various colours and sizes)
    • Resistors: 5 of each value: 100R, 220R, 330R, 1K, 10K
    • Diffuse LEDs: 5 of each: Red, Green, Yellow
    • Tactile (tact) switches: 5
    • General purpose diode (1N4148)
    • Mini Light sensor (LDR)
    • Miniature speaker (12mm diameter, 40 ohm)
    • 9V Battery lead to provide power on the move
    This is all you need for the example projects:
    • Blink
    • Fade
    • Digital Read Serial
    • Analog Read Serial
    • BlinkWithoutDelay
    • Debounce
    • StateChangeDetection
    • ToneKeyboard
    • ToneMelody
    • and many more

    Optional extra: Arduino Project Handbook. A full colour guide with 45 sample projects showing how to make the projects and program the Arduino. Every Arduino maker should have one!
    Add to Cart
    £10.80
Per Page      1 - 5 of 5

Powered by Abantecart eCommerce Solution